The process
Nuclear facilities hold buildings under controlled negative pressure with HEPA-filtered exhaust and conditioned supply. Fans are specified for reliability and filtration, with dampers that isolate zones.
The gas
Filtered, conditioned supply air through pre, fine and HEPA filters. The fan is selected against the filter pressure drop as it loads, at low noise.
Selection for this process
| Type | Guillotine for isolation, multi louver or butterfly for control, diverter where the gas is switched between two paths |
| Material | Mild steel |
| Sealing | Seal air arrangement where tight shut-off is needed on hot or dusty gas |
Types, construction and performance of the dampers.
Industries
Fans in nuclear facility ventilation
Dampers in other processes
Waste Heat Recovery BoilersCement Preheater KilnsVertical Roller Raw MillsClinker Grate CoolersRotary Lime KilnsSponge Iron Rotary KilnsBlast Furnace Hot Blast StovesSinter PlantsElectric Arc Furnace SteelmakingLadle Furnaces and Secondary MetallurgySteel Reheating FurnacesFerro Alloy Submerged Arc FurnacesCopper and Zinc SmeltingGlass Melting FurnacesCeramic Tunnel and Roller KilnsWaste IncineratorsRefinery Fired HeatersBOF Steel ConvertersIron Ore Pellet Plants
Information needed to select or quote
- Gas volume and temperature. Actual flow at the inlet, normal and upset temperature, moisture.
- Dust or pollutant. Inlet loading, particle size distribution, whether it is abrasive, sticky, hygroscopic or combustible; for gases, the species and concentration.
- Required outlet. The emission limit or clean gas concentration the unit must meet.
- Site. Available space and height, material of construction preferences, and how the collected material is to be discharged.