Fans and Air Pollution Control for Rice Husk Fired Boilers

The process

Rice husk burns in a fluidised bed or on a grate and leaves an ash that is largely silica. The ash erodes anything it touches at velocity, so the ID fan is built with wear liners and the dust collector is placed ahead of it. Rice mills and husk-fired captive power plants run these boilers at steady load for long periods.

The gas

Rice husk ash is high in silica and among the most abrasive fly ashes a boiler fan handles. Blade wear is the limiting factor; wear liners, hard facing and a blade form that resists erosion set the design.

Fans in this process

Duty	What it does here	Type usually selected
ID Fan	Sits at the outlet of a boiler, kiln or furnace and draws the flue gas through the plant to the stack.	Backward curved, backward inclined and radial tipped
FD Fan	Supplies combustion air to a boiler or furnace, pushing ambient air through the air heater and into the windbox against the furnace draft.	Backward curved and backward inclined
SA Fan	Supplies the secondary combustion air that completes burning above the grate or around the burner.	Backward curved and backward inclined
PA Fan	Supplies the air that dries the pulverised fuel in the mill and carries it to the burners.	Backward curved and radial tipped
Combustion Air Blower	Feeds a burner with air at the pressure the burner register needs.	Backward curved and radial tipped
Seal Air Blower	Supplies clean air at a pressure above the mill or fan casing pressure to the shaft seals and bearing housings, so pulverised coal cannot enter..	Backward curved and radial
Dust Collector Fan	The fan behind a bag filter, cyclone or multiclone on a dust extraction system.	Backward inclined and radial tipped
Bag Filter Fan	Pulls the process gas through the filter bags and discharges the cleaned gas to the stack.	Backward curved and radial tipped
Fan Silencer	An absorptive silencer at the fan inlet, outlet or in the duct, cutting fan noise with minimum pressure loss..	Silencer
Vent Silencer	Cuts the noise from steam or gas expanding from high pressure to atmosphere at safety valve outlets, start-up vents and blow-down lines..	Silencer
Ventilation Fan	Moves air through a plant or building for fresh air supply, heat removal and fume dilution where the system is ducted.	Backward inclined and forward curved

Industries

Related processes