The process
Recovery boilers, lime kilns and digesters in a pulp mill need the boiler fan set, non-condensable gas handling, and scrubbing of odorous gases. Corrosion and odour are the design concerns alongside the usual boiler duties.
The gas
Mixed biomass fuels give variable ash and moisture. The fan is sized for the worst fuel in the mix, with wear protection and deposit shedding as for bagasse.
Selection for this process
| Type | Venturi for fine dust |
| Material | Stainless steel |
| Outlet | Mist eliminator ahead of the fan; fan in the same material as the scrubber |
Types, construction and performance of the wet scrubber.
Industries
Fans in pulp mills and recovery boilers
Wet Scrubber in other processes
Copper and Zinc SmeltingHot Dip Galvanising LinesWaste IncineratorsBiomedical Waste IncineratorsCrematoriaChemical Reactor and Tank VentsEffluent Treatment and Zero Liquid Discharge PlantsFertilizer Granulation PlantsSulphuric Acid PlantsAutomotive Paint ShopsPickling and Acid Treatment LinesTyre Curing PressesBlasting and Painting HallsWater and Wastewater Treatment PlantsBOF Steel ConvertersSugar Dryers and SulphitationLead Smelting and Battery RecyclingCashew and Nut Processing
Information needed to select or quote
- Gas volume and temperature. Actual flow at the inlet, normal and upset temperature, moisture.
- Dust or pollutant. Inlet loading, particle size distribution, whether it is abrasive, sticky, hygroscopic or combustible; for gases, the species and concentration.
- Required outlet. The emission limit or clean gas concentration the unit must meet.
- Site. Available space and height, material of construction preferences, and how the collected material is to be discharged.