The process
Acid pickling tanks are hooded and the fume drawn to a scrubber in PP-FRP. The fan is in the same material, after the scrubber and mist eliminator, with the motor outside the gas path.
The gas
Fume from pickling, acid handling or reactor vents, corrosive and often wet. PP-FRP, FRP or rubber lined construction, with the motor outside the gas path.
Selection for this process
| Type | Packed bed for gas absorption |
| Material | PP-FRP or rubber lined |
| Outlet | Mist eliminator ahead of the fan; fan in the same material as the scrubber |
Types, construction and performance of the wet scrubber.
Industries
Fans in pickling and acid treatment lines
Wet Scrubber in other processes
Copper and Zinc SmeltingHot Dip Galvanising LinesWaste IncineratorsBiomedical Waste IncineratorsCrematoriaChemical Reactor and Tank VentsEffluent Treatment and Zero Liquid Discharge PlantsFertilizer Granulation PlantsSulphuric Acid PlantsPulp Mills and Recovery BoilersAutomotive Paint ShopsTyre Curing PressesBlasting and Painting HallsWater and Wastewater Treatment PlantsBOF Steel ConvertersSugar Dryers and SulphitationLead Smelting and Battery RecyclingCashew and Nut Processing
Information needed to select or quote
- Gas volume and temperature. Actual flow at the inlet, normal and upset temperature, moisture.
- Dust or pollutant. Inlet loading, particle size distribution, whether it is abrasive, sticky, hygroscopic or combustible; for gases, the species and concentration.
- Required outlet. The emission limit or clean gas concentration the unit must meet.
- Site. Available space and height, material of construction preferences, and how the collected material is to be discharged.