The process
The sugar dryer blows hot and cold air through the crystal, with an exhaust fan taking the sugar dust to a wet scrubber. The sulphur burner needs a blower for combustion air and the sulphitation tower exhausts sulphur dioxide fume through a scrubber.
The gas
Air saturated with moisture from drying, with condensation on any cool surface. Drainage, a shaft seal and a material that tolerates wet running are part of the specification.
Selection for this process
| Type | Spray tower or cyclonic spray |
| Material | Stainless steel |
| Outlet | Mist eliminator ahead of the fan; fan in the same material as the scrubber |
Types, construction and performance of the wet scrubber.
Industries
Fans in sugar dryers and sulphitation
Wet Scrubber in other processes
Copper and Zinc SmeltingHot Dip Galvanising LinesWaste IncineratorsBiomedical Waste IncineratorsCrematoriaChemical Reactor and Tank VentsEffluent Treatment and Zero Liquid Discharge PlantsFertilizer Granulation PlantsSulphuric Acid PlantsPulp Mills and Recovery BoilersAutomotive Paint ShopsPickling and Acid Treatment LinesTyre Curing PressesBlasting and Painting HallsWater and Wastewater Treatment PlantsBOF Steel ConvertersLead Smelting and Battery RecyclingCashew and Nut Processing
Information needed to select or quote
- Gas volume and temperature. Actual flow at the inlet, normal and upset temperature, moisture.
- Dust or pollutant. Inlet loading, particle size distribution, whether it is abrasive, sticky, hygroscopic or combustible; for gases, the species and concentration.
- Required outlet. The emission limit or clean gas concentration the unit must meet.
- Site. Available space and height, material of construction preferences, and how the collected material is to be discharged.